Categories
Manufacturers
Information
Privacy Policy
Terms of Use
About Aura Motorsports
Printable Catalog
Site Map
test
KW Clubsport coilovers for the BMW 1 Series (E81/E82/E87)  $3,199.99 

Description

KW Clubsport coilovers was developed for customers, who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the optional adjustable top mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track.

KW Clubsport suspension kits are independently adjustable in compression and rebound forces and include high performance racing springs. Racing top mounts are optionally available for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times.

  • Height adjustable coilovers
  • Performance setup for the racetrack
  • Dampers in compression & rebound forces independently adjustable
  • Use of high performance linear race springs/li>
  • In stainless steel technology inox-line
  • Additional available with racing top mounts
  • TÜV approval possible depending on the specification
    (see references)

Compression and Rebound adjustment


The rebound adjustment, produced with the widest range of adjustment for that specific vehicle, is carried out by an adjustment spindle at the end of the piston rod. Most of all, the rebound controls the car body vibration, but at the same time the damping range also affects the handling and comfort at low speeds. With the rebound adjustment, the car can be adjusted to the demands of the driver; the driving impression can range from comfortable ride quality to a tighter and tense ride with improved road-holding characteristics.

The compression adjustment takes place at the lower end of the shock absorber by our patented multi-purpose valve. The number of pre-adjustable parameters of this valve allows a wide range of adjustments. The unique low-speed compression adjustment makes this technology unique. Within this damping range, the driving behavior of the car is strongly influenced. An increasing damping force already supports the car at the compression and therefore avoids rolling motions. The steering behaviour significantly improves.

KW anti-sway bars


Give your KW clubsport coilover the finishing touch with KW anti-sway bars. Manufactured in Germany.

The KW anti-sway bar enables fine tuning of the handling characteristics of your vehicle. It reduces the body roll of the vehicle and provides increased stability. The result: improved handling and increased grip during any driving maneuvers. KW anti-sway bars are manufactured from drop-forged heavy-duty aircraft steel for high-precision performance and covered with a durable powder coat finish. Kits include mounting hardware and an easily to comprehend instruction manual.

  • Reduction of body roll during cornering and aggressive maneuvers
  • No reduction in damping comfort during compression on both sides
  • Reduction of load differences between the inner- and outer wheel when driving bends
  • Positive impact on the under- or over-steering tendencies (roll steer effect)

Aluminium unibal top mount


Adjustable top mounts are made from high grade aluminum and are included in the application when a technical advantage can be achieved. A special gasket system prevents the intrusion of dirt and moisture into the free-from-play pre-stressed uniball-bearings and therefore prevents corrosion and wear.

  • Scaled camber adjustment (optionally also caster)
  • Sealed, pre-stressed uniball-bearing in stress direction
  • Made of tool steel (100Cr6); 58 to 64 HRC – hard chrome plated,
    PTFE lubricant, stainless steel outer ring (X200Cr13)
  • Axial bearing as balance on McPherson struts

High-performance racing springs


The new KW high-performance springs are produced from specially alloyed and tempered spring steel, and the increased resilience of the material enables new spring designs with reduced spring thickness. This makes the springs up to 30% more efficient than conventional racing springs. With the same overall length this means:

  • more suspension travel
  • higher block loading
  • lower weight

Further weight reduction can be achieved by shortening the overall length of the springs and adjusting the necessary block loading.

  • shorter overall spring length
  • improved freedom of wheel movement
  • further weight reduction
Write Review
plus 1
minus 1
 
First Product Previous Product 5 of 5 in 1 Series  
Myspace PageFacebook PageTwitter Page
Shopping Cart more
0 items
My Wish List more
0 items
Sign in
E-mail address:

Password:

Password forgotten
Create an Account
Tell A Friend
 
Tell someone you know about this product.
What's New? more
Arqray Schaferhund Exhaust (Stainless) for the Honda S2000
Arqray Schaferhund Exhaust (Stainless) for the Honda S2000
$1,159.00
Bestsellers
01.KW H.A.S. Coilover Spring Kit for the Mercedes-Benz CLS63 AMG (W
02.Titek Blowoff Valve Kit BMW 07+ 335i
Reviews more
Write ReviewWrite a review on this product!
Manufacturer Info
KW Suspension
KW Suspension Homepage
Other products

bottom-test